Guide 02 · As at 4 October 2026

Setting up an industrial base in Johor: what to check before you commit

Ownership rules, the specifications that decide a site, the full cost, and the mistakes that cost the most.

1. Start with the brief, not the site

Most failed relocations go wrong before the first viewing, because the requirement was never written down. Eight questions settle it:

  1. Why Johor, and why now: expansion, relocation, cost, capacity or a customer pulling you in?
  2. What will happen on site, and is any process hazardous? This sets light, medium or heavy industry.
  3. What specification: land and built-up, power, eave height, floor loading, loading bays, office share, room to expand?
  4. Where must you be near: Singapore, a port, the airport, customers, suppliers, a labour pool?
  5. When must you be operating, and when is the decision made?
  6. Lease or buy, which entity will hold it, and what budget?
  7. How many people, with what skills, and who relocates from Singapore?
  8. Who decides, who recommends, and which approvals and incentives are you targeting?

2. Lease or buy

LeaseBuy
Capital requiredDeposits, fit-out and reinstatementPrice plus about 5% to 10% in costs, more for foreign interests
SpeedFaster; no state consent for most leasesSlower; state consent for foreign interests adds time
FlexibilityExit at lease end; renewal riskControl over the asset; exit depends on resale
SuitsFirst phase, uncertain volumes, testing the marketLong-term operations, heavy fit-out, custom specification

Many companies lease for the first phase and buy or build once volumes are proven. Leases to foreign interests over longer terms can need registration and consent; check with your lawyer before signing.

3. Rules for foreign buyers

Sources: Bar Council Circular 444/2024 (23 Dec 2024); PTG Johor Circular 3/2025; Skrine and PwC Malaysian Tax Booklet 2025/26; LHDN.

4. Ten specifications that decide a site

SpecificationWhy it matters
Power supply (amps or kVA)An upgrade with TNB can take months and money. Confirm capacity before you shortlist.
Eave heightRacking and cranes are limited by the lowest point of the roof, not the ridge.
Floor loading (kN/m²)Heavy machinery and high racking need it confirmed on drawings.
Land use and express conditionLight, medium or heavy industry on the title decides what you may legally run.
Title and tenureFreehold or leasehold, years remaining, renewal premium, final or qualified title.
CCC and approved plansUnapproved extensions can block your licence and your bank.
Fire certificate and systemBomba approval and sprinkler type, especially for high-bay storage.
Access and loadingContainer-truck access, road width, loading bays and dock levellers.
Land against built-upRoom to expand, open yard and lorry parking.
Restrictions and encumbrancesState consent to transfer, lease or charge; existing charges and caveats.

5. The full cost: an illustration

The price is not the cost. Below is an illustrative purchase of a RM 5 million factory, comparing a Malaysian-owned company with a company that counts as a foreign interest.

Cost itemBasisMalaysian-owned (RM)Foreign interest (RM)
Stamp duty on transferScale: 1% / 2% / 3% / 4%184,000184,000*
State approval fee4% for industrial–200,000
State consent applicationFixed fee–2,000
Legal feeScale 1.25% / 1%, plus 8% service tax55,35055,350
Searches and disbursementsEstimate3,0003,000
Total before financing242,350 (4.8%)444,350 (8.9%)

* Assumes the standard scale applies; confirm with your lawyer. Excludes land office registration fees, loan costs, power upgrades, fit-out, racking and licences. Illustrative only.

For a lease, budget for deposits, service tax on rent (6% from 1 January 2026 where the landlord is registered), stamp duty and legal fees on the tenancy, fit-out, and reinstatement at the end of the lease.

Figures are estimates for discussion only and do not constitute a guarantee of returns or financial advice. Verify with your lawyer, bank and tax adviser.

6. People and permits

Sources: Baker McKenzie, 26 Jan 2026 and EY, Jun 2026 (Employment Pass); EPF guidance reported 2025; MITI, 14 Oct 2025.

7. Six expensive mistakes

  1. Signing before checking the express condition. A light-industry title will not permit a medium-industry process.
  2. Assuming the extension is approved. Many factories have extensions not on the approved plans.
  3. Discovering the power gap after signing. Upgrades can take longer than the fit-out.
  4. Ignoring the lease clock. A leasehold title with 20 years left affects financing and resale.
  5. Budgeting on price alone. State fees and stamp duty can add 9% or more for a foreign interest.
  6. Leaving consent too late. State consent and its timing belong in the project plan from day one.

Get the one-page checklist

Thirty checks before you sign, with who verifies each one, or share your brief and I will apply them to real sites.

This guide summarises public information as at 4 October 2026 for discussion only. It is not legal, tax, valuation or investment advice. Ronald Mak | Johor Realtor (REN 80365), PropNex Realty Sdn. Bhd.